Below are highlights and photographs from the full-color installation instructions that come with every kit. The step-by-step instructions also include a schematic wiring diagram. For other questions, contact us or post in The Wolf Miata Forum.

The Wolf Miata system offers the following protection:

• Opening the hood, trunk or doors will sound the siren and flash the turn signals.

• An adjustable shock sensor also sounds the alarm if your vehicle is hit.

• A microwave radar sensor protects the inside of the vehicle from intruders even if the top is down. This sensor detects mass, but is not set off by wind or vibration.

• When the alarm is set, a starter kill relay is activated.

Under the Hood
Mount the pin switch and bolt the siren in place.

In the Trunk
Trim clip removal.	Running the cable.   View behind the driver's seat.
Trunk Sensor

Flashing LED	Door Switch

The Alarm Module	Mount the Alarm
Under the Steering Column
Shock Sensor on the Steering Column	Radar Sensor in the Glove Box     Radar Sensor Above the Glove Box