Our exclusive, Swiss-made, trunk operating motor installs to the back of  the trunk key lock. You just remove two bolts, position the bracket and refit the bolts. It then attaches to the trunk opening rod with a small connecting rod and clamp, in the same way as our power lock system.

The trunk light fits with just one bolt, through a factory-made hole in the inside lip of the trunk lid. 

One of the main advantages of our system is that the operating switch for the trunk light is built into the trunk motor so that there are no pin switches or mercury switches to fit! This same switch can also be used to trigger the optional alarm system if the trunk is forced open.

The two items are connected together with a pre-made, plug-in harness that hooks up to the battery and to the front of the vehicle.